Browsing by Author "Oktar, Faik N"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Adhesion and Scratch Testing of Antibiotic Loaded Poly-Lactic Acid Biocomposite Thin Films on Metallic Implants
    (Trans Tech Publications, 2018-10) Karacan, Ipek; Chou, Joshua; Ben-Nissan, Besim; Macha, Innocent J; Juritza, Arion; Wang, Andy H; Muller, Wolfgang H; Grossin, David; Taraschi, Valerio; Oktar, Faik N; Swain, Michael
    Surface modifications have been progressively applied in order to improve the mechanical, biological and chemical properties of metallic dental and orthopedic implants. Therefore, the novel and multifunctional biocomposites coating matrices, which also consist of local and targeted drug delivery systems, are the most recent applications in the medical field. In this study, gentamicin antibiotic containing HAp bioceramics were utilized in a biodegradable poly-lactic acid thin film matrix which was applied to Ti6Al4V metallic implant surfaces. Nanoindentation and scratch test methods were applied. It was observed that, bonding between coating and the substrate is strong enough to be used in implant applications. Additionally, it was observed that the hardness and Young's Modulus values of uncoated Ti6Al4V disc were 4.3 and 125.2 GPa, respectively. However, under the same testing conditions, it was also observed that the H values (0.6-0.8GPa) and the E (50-60 GPa) values of PLA-HAp biocomposite coated samples are slightly higher than the H values (0.4-0.6 GPa) and the E values (40-50GPa) of only PLA coated sample.
  • Thumbnail Image
    Item
    An Alternative Synthesis Method for Di Calcium Phosphate (Monetite) Powders from Mediterranean Mussel (Mytilus galloprovincialis) Shells
    (Springer NATURE, 2013-08) Macha, Innocent J; Ozyegin, Lutfiye S; Chou, Joshua; Samur, Ramazan; Oktar, Faik N; Ben-Nissan, Besim
    Marine species, such as corals, sea shells and nacres, attract special interest in bioceramics field for bone graft, bone cements and drug delivery applications. Most of the marine structures are made up of pure calcium carbonate (calcite or aragonite) with a very small amount of an organic matrix. In the past the most common way to transform these structures to hydroxyapatite was hydrothermal transformation method. This current work introduces a new approach for producing fine powders of calcium phosphates from Mediterranean mussel (Mytilus galloprovincialis) shells. A comparative study was carried out to investigate the differences of these powders under only hot plate heating and hot plate heating together with ultrasonic agitation while H3PO4 was added. The temperature of the hotplate was kept constant at 80 oC and then, H3PO4 was added drop wise into the solution for 2 hrs. The mixture was then placed into an oven at 100 oC for 24 hrs. They were further calcined at 800 oC for 3 hrs. XRD, FTIR and ICP-MS were used to identify the structure and composition. It was found that the final powders were predominantly monetite, with some tricalcium phosphate as a secondary phase. This relatively simple and efficient method can be easily applied to produce calcium phosphate precursor powders for a range of biomedical applications.
  • Thumbnail Image
    Item
    Comparative study of Coral Conversion, Part 2: Microstructural evolution of calcium phosphate
    (Springer NATURE, 2015-06) Macha, Innocent J; Boonyang, Upsorn; Cazalbou, Sophie; Ben-Nissan, Besim; Charvillat, Cédric; Oktar, Faik N; Grossin, David
    Calcium phosphate materials can be easily produced by a number of wet chemical methods that involve both acidic and basic environments. In our previous study, we investigated calcium phosphates such as monetite (DCPA), hydroxyapatite (HAp) and whitlockite which were successfully produced by mechano-chemical method from corals obtained from the Great Barrier Reef. It was observed that a number of synthesis factors such as the pH of the environment, the reaction temperature and the chemistry influenced the crystal size formed. A number of theories have been suggested on the mechanisms of crystal formation; however, very few mechanisms have been universally accepted. The present work was aimed to explore the evolution of crystalline calcium phosphate and their morphology with respect to the pH of the environment and reaction time. Conversion of coral to calcium phosphates was carried out with stoichiometric amount of required H3PO4 or (NH4)2HPO4, to obtain hydroxyapatite or tricalcium phosphate (TCP) phases. The acidic or basic solution was added, drop wise, at a rate of 2 mL min-1, to 6 g of coral powder suspended in 300 mL of distilled water at 80 ± 0.5°C on a hot plate with magnetic stirrer. The pH of reaction was monitored. Crystal morphology and the phases were identified by XRD, FTIR, and SEM studies. It was observed that under acidic conditions (H3PO4), dissolution and then precipitation influences the crystal morphology and transition from plate like to rod like hydroxyapatite structure. During the first hour of the dissolution a monetite and hydroxyapatite mixture precipitates and then the full conversion to hydroxyapatite is observed. However under basic conditions (NH4)2HPO4), pH is only marginally changed within the environment and just surface conversion of the calcium carbonate structure of coral to hydroxyapatite and a very small amount of tri-calcium phosphate is observed. The mechanism can be classified as the solid state topotactic ion-exchange reaction mechanism.