Lyaka, A.L. and Mulibo, G.D.2021-04-202021-04-202018-08-03Lyaka, A.L. and Mulibo, G.D. (2018) Petrophysical Analysis of the Mpapai well Logs in the East Pande Exploration Block, Southern Coast of Tan- zania: Geological Implication on the Hy- drocarbon Potential. Open Journal of Ge- ology, 8, 781-802. https://doi.org/10.4236/ojg.2018.88046http://hdl.handle.net/20.500.11810/5635This study presents results of log analysis from Mpapai well, which is located in the East Pande Block, southern coast of Tanzania. The study aimed at as- sessing the hydrocarbon potential of lithological units encountered during drilling of Mpapai well. To achieve the general objective, suites of wire-line logs from Mpapai well were used for the analysis. Based on wire-line logs, three types of lithology were identified which include sandstone, shale and li- mestone. Seven sandstone bodies marked as MpapaiA, B, C, D, E, F and G were identified with their tops and bases at the depth interval from 3004 m to 4008 m. Four zones among seven sandstones bodies marked as MpapaiB, E, F and MpapaiG were identified as reservoir zones. Computed petrophysical pa- rameters for the four reservoir zones gave an average total porosity ranging from 14% to 21% with low permeability in the range of 3.92 mD to 13.67 mD. The low permeability indicates that the reservoir sand bodies are impermea- ble, that might have been affected by the geology of the area where high con- tent of clay minerals reduces permeability due to filling in open spaces. The fluid type defined in the reservoir zones is basically water with high saturation greater than 75%, which indicates that the proportion of void space occupied by water is high, consequently low hydrocarbon saturation and production. Despite of fair to good porosity, the low permeability and high-water satura- tion indicate that the quality of Mpapai prospect is poor.enLithology, Hydrocarbon, Mpapai, Reservoir, GeologyJournal Article, Peer Revieweddoi.org/10.4236/ojg.2018.88046